( Available with 2 Different Power Ratings, and offered in either Single Power Supply Unit Model, Redundant Hot-Swappable Power Module Model or Current Shared Power Module Model )
Overview
INTRODUCTION
The DSGio CMS-48P410GF managed PoE switch is built for diverse network deployments, offering a high-bandwidth, non-blocking switch fabric to ensure low-latency, high-speed data transmission. It features multi-rate uplink ports for flexible and scalable network expansion, along with link aggregation to boost overall throughput.
With IEEE 802.3af/at/bt PoE support, it delivers reliable power to connected IP devices. Advanced Layer 2+ management functions—including VLAN, QoS, and robust security features—enable efficient network segmentation and traffic optimization. Its 19-inch rack-mountable form factor allows seamless integration into standard enterprise and data center environments.
SPECIFICATIONS
Interface | ||||
10M/100M/1000Mbps RJ45 Port | 48 | |||
1G/2.5G/10Gbps SFP+ Slot | 4 | |||
RJ45 Console Port for CLI Management | 1 | |||
System Performance | ||||
Packet Buffer | 32Mb | |||
SDRAM Memory (DDR3) | 16Gb | |||
NOR Flash Memory | 256Mb | |||
NAND Flash Memory | 2Gb | |||
MAC Address Table Size | 32K | |||
Jumbo Frame | 10KB | |||
Switching Capacity | 176Gbps | |||
Forwarding Rate (64-byte) | 130.944Mpps | |||
Power over Ethernet | ||||
PoE Power Output | Port 1 – 12 : IEEE 802.3bt, 90W Max. | |||
Port 13 – 48 : IEEE 802.3at, 30W Max. | ||||
PoE Power Type | IEEE 802.3at : End-Span, Mode A, 1/2(+), 3/6(-) | |||
IEEE 802.3bt : End-Span, Type 4, 3/4/5/6(+), 1/2/7/8(-) | ||||
L2 Features | ||||
Auto-Negotiation | ● | |||
Auto MDI/MDI-X | ● | |||
Flow Control (Duplex) | 802.3x (Full) | ● | ||
Back-Pressure (Half) | ● | |||
Spanning Tree | IEEE 802.1D (STP) | ● | ||
IEEE 802.1w (RSTP) | ● | |||
IEEE 802.1s (MSTP) | ● | |||
VLAN | VLAN Group | 4K | ||
Tagged Based | ● | |||
Port-Based | ● | |||
Voice VLAN | Voice VLAN with OUI | |||
Link Aggregation | IEEE 802.3ad with LACP | ● | ||
Static Trunk | ● | |||
Max. Static Aggregation Group | 26 | |||
Max. Port per Static Agg. Group | 16 | |||
IGMP Snooping | IGMP Snooping v1/v2/v3 | Supports 1024 IGMP Groups | ||
IGMP Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |||
IPv6 MLD Snooping | Supports 1024 MLD Groups | |||
MLD Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |||
Querier, Immediate Leave | ● | |||
Storm Control (Broadcast / Multicast / Unknown Unicast) | ● | |||
Loop Protection | ● | |||
QoS Features | ||||
Number of Priority Queue | 8 Queues/Port | |||
Rate Limiting | Ingress | Yes, 1 KBps/1pps | ||
Egress | Yes, 1 KBps/1pps | |||
DiffServ (RFC2474 Remarking) | ● | |||
Scheduling (WRR, Strict, Hybrid) | ● | |||
CoS | IEEE 802.1p | ● | ||
IP ToS Precedence, IP DSCP | ● | |||
Security | ||||
Management System User Name / Password Protection | ● | |||
User Privilege | Set User Privilege up to 15 Level | |||
Port Security (MAC-based) | ● | |||
IEEE 802.1x Port-based Access Control | ● | |||
ACL (L2/L3/L4) | ● | |||
IP Source Guard | ● | |||
RADIUS (Authentication, Authorisation, Accounting) | ● | |||
TACACS+ | ● | |||
HTTP & SSL (Secure Web) | ● | |||
SSH v2.0 (Secured Telnet Session) | ● | |||
MAC / IP Filter | ● | |||
Management | ||||
Command Line Interface (CLI) | ● | |||
Web Based Management | ● | |||
Telnet | ● | |||
Access Management Filtering | SNMP/Web/SSH/Telnet | |||
Firmware Upgrade via HTTP | ● | |||
Dual Firmware Images | ● | |||
Configuration Download / Upload | ● | |||
SNMP (v1/v2c/v3) | ● | |||
RMON (1, 2, 3 & 9 Groups) | ● | |||
DHCP (Server / Client / Relay / Option 82 / Snooping) | ● | |||
System Event / Error Log | ● | |||
TFTP (Trivial File Transfer Protocol) | ● | |||
NTP / LLDP | ● | |||
Cable Diagnostics | ● | |||
IPv6 Configuration | ● | |||
Port Mirroring | ● | |||
Physical Characteristics | ||||
Dimension (W x H x D) | 440 x 44 x 382/410 mm (CRPS) | |||
LED Indicator | Power (Amber) | On / Off | Power On / Off | |
PoE (Amber) | On / Off / Blinking | PoE On / Off / PD Fault | ||
Link/Act. (Green) | On / Flashing | Link / Transmitting | ||
Reset Button | 1 | |||
Cooling | Fan Cooling | |||
Enclosure | Metal | |||
Installation | Rack Mount | |||
Weight | 1 CRPS | 5.5Kg (TBC) | ||
2 CRPS | 6.5Kg (TBC) | |||
System Power Requirements | ||||
System Power Input | 100-240 V~, 50-60Hz | |||
Max. System Power Consumption | 45W | |||
Environment Limits | ||||
Operating Temperature | 0 ~ 50°C | |||
Storage Temperature | -20 ~ 80°C | |||
Humidity | 10 ~ 90% RH (Non-condensing) | |||
Certifications and Protection | ||||
ESD | DC Contact 4KV, Air 8KV | |||
Surge | AC Line to Line 1KV, Line to Ground 2KV | |||
Electromagnetic Emissions (EMC) | CE, FCC, UKCA Class A | |||
Standard | ||||
IEEE 802.3 – 10Base-T | ● | |||
IEEE 802.3u – 100Base-TX | ● | |||
IEEE 802.3ab – 1000Base-T | ● | |||
IEEE 802.3z – 1000Base-SX/LX | ● | |||
IEEE 802.3ae – 10GBase (SFP+) | ● | |||
IEEE 802.3af – Power over Ethernet (PoE) | ● | |||
IEEE 802.3at – Power over Ethernet (PoE+) | ● | |||
IEEE 802.3bt – Power over Ethernet (PoE++) | ● | |||
IEEE 802.3az – Energy Efficient Ethernet (EEE) | ● | |||
IEEE 802.3x – Flow Control | ● | |||
IEEE 802.3ad – Link Aggregation Control Protocol (LACP) | ● | |||
IEEE 802.1Q – VLAN Tagging | ● | |||
IEEE 802.1v – Protocol-Based VLAN | ● | |||
IEEE 802.1p – Class of Service (CoS) | ● | |||
IEEE 802.1D – Spanning Tree Protocol (STP) | ● | |||
IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP) | ● | |||
IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP) | ● | |||
IEEE 802.1AB – Link Layer Discovery Protocol (LLDP) | ● | |||
IEEE 802.1X – Port-Based Network Access Control | ● | |||
ITU-T G.8032/Y.1344 – Ethernet Ring Protection Switching (ERPS) | ● | |||
Product Features
· IP Source Guard and Port Security for enhanced access control
· IEEE 802.3af/at/bt PoE support, delivering up to 90W or 30W per port
· Non-blocking Switching Architecture
· Layer 2+ Fully Managed Features, including MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACACS+, and ACLs
· Integrated DHCP Server, DHCP Relay, and DHCP Snooping
· Support for Voice VLAN and PD Alive Check for improved device monitoring
· Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption
· Multicast Support, including IGMP Snooping (v1/v2/v3), IGMP Proxy, IGMP Querier, MVR, and MLD Snooping (v1/v2)
Power Supply Unit Bundle Configuration
Model No. | Power Source Unit (PSU) | PoE Port | PoE Budget |
CMS-48P410GF-920W | 1 | 12BT + 16AT | 860W |
CMS-48P410GF-RP920W | 2 (Redundant) | 12BT + 16AT | 860W |
CMS-48P410GF-CS1840W | 2 (Shared) | 12BT + 16AT | 1780W |
CMS-48P410GF-1200W | 1 | 12BT + 16AT | 1140W |
CMS-48P410GF-RP1200W | 2 (Redundant) | 12BT + 16AT | 1140W |
CMS-48P410GF-CS2400W | 2 (Shared) | 12BT + 16AT | 2160W |
Model Name Abbreviation with RP denotes Redundant Power, and CS denotes Current Shared
Note : The RP and CS switch hardware design supports dual power supplies. This feature is hardware-based and not user-configurable.

