Adder DV100 Overview
With the Adder ADDERLink DV100 HDMI Extender Pair you can send an SD or HD HDMI signal up to 164′ over standard Category (CatX) cable without any signal degradation. This solution works particularly well with computers, as the DV100 takes power from a standard USB Type A port. For operation, simply plug the transmitter into an HDMI port and a USB port on the source, connect the receiver to the transmitter with a Category cable, and plug the receiver into the HDMI port on your display or projector. Multichannel audio, HDCP, and EDID information are passed through, so you can watch protected HD content from Blu-ray players or other devices.
The ALDV100P is suitable for a wide range of applications, especially for the Digital Signage (DOOH – Digital Out-Of-Home) and Audio Visual (AV) industries.
- Pixel perfect HDMI digital video up to 1080p or 1920×1200 @ 60Hz
- Digital audio support up to eight channels
- Extend video up to 164 feet (50 meters) over a single CATx cable
- USB Line-powered – No external power supplies are required
- Locking HDMI connectors make the DV100 a perfect video wall companion and ideal for broadcast in public environments
- Intelligent EDID management
- Plug and Play – no need to wait for drivers or software to be installed
- Seamless interconnectivity: HDMI transmitters (ALDV100T) can be connected to Adder DV family DVI-D receivers (ALDV120R) and vice versa.
Technical Specifications
| Video | HDMI |
| Maximum Resolution | 1920 x 1200 @ 60Hz; supports 480p, 720p, 1080p |
| Colour Depth | 24-bit |
| Audio | 8 channels HDMI audio; 16/20/24-bit; 32–192kHz |
| Extension Distance | Up to 50m over single CATx (CAT6 shielded or better) |
| Power | USB powered; 5V DC, 2.5W total for pair |
| Operating Temperature | 0–40°C (32–104°F) |
| Dimensions | 45mm W × 21mm H × 63mm D, 250g (pair) |
| Certifications | CE, FCC |
| Setup | Plug and play; no drivers required |
Source: Adder Technology — ADDERLink DV100 (HDMI). Verify with manufacturer.
