extend high-resolution 4K video signals at 60 Hz over standard IP-based networks on layer 3.
The system processes DisplayPort 1.2 image data pixel-perfectly and with very good hand-eye coordination.
An extender system consists of a computer module (CPU) and a console module (CON) and lets you operate a computer from a great distance.
Video
- bluedec™ – advanced developed compression algorhythm of the latest generation for best video quality and latency-free transmission
- E-EDID support
- Resolution up to
4096 × 2160 @ 60 Hz (4K2K/60Hz),
2560 × 1440 @ 144 Hz,
1920 × 1080 @ 240 Hz (Full HD/240Hz)
Signals
- Encrypted video, keyboard, mouse and control data (AES-128)
- Full keyboard/mouse emulation
- Transparent audio signals (stereo, analog)
- Embedded stereo audio (DisplayPort Digital, 2 channel LPCM)
- Transparent RS232 (max. 115,200 bps)
- GenericUSB support for USB classes HID (Human Interface Device) and mass storage
- The product allows the simultaneous use of up to three GenericUSB devices via a console module. For this, both the used console module and the used computer module must support the use of up to three GenericUSB devices.
Transmission
- Via CAT-x cable and over IP-based networks (layer 3)
- KVM-over-IP™
Device
- Ident LED for quick location of the device in complex installations
- Internal power pack for main power supply
System update
- Updating via Config Panel 21 (HTML5, Java-free, optimized operation)
Security features
- Screen-Freeze: If the console module loses the video signal due to a broken connection or a problem with the computer’s graphics card, the Screen-Freeze function “freezes” the last displayed image of the monitor. This state is highlighted by a red semi-transparent frame. The function is automatically cancelled when an active video signal exists again.
- secure and trouble-free operation through pairing and encryption with be AES-128 (cannot be manipulated)
- additional, independent management interface
- With the Monitoring function, you can auto-output device status messages to Syslog servers or SNMP. The web interface lets you monitor the device manually.
Operation features
- Due to predefined IP addresses, plug & play is supported for the modules. Therefore it couldn’t be easier to use existing network infrastructures to put the modules into operation in a 1:1 connection.
- support of Quality of Service (QoS), can be configured by users
- users can configure network ports of the respective communication channels
- manual bandwidth management to adjust the required bandwidth
Device
- redundant, external power supply
System expansion
- integrated matrix support for use in combination with a ControlCenter-IP or ControlCenter-IP-XS
- Mix & match in the KVM-over-IP product family:
Select the appropriate KVM-over-IP extender system from our product portfolio. The modules of this product family are compatible with each other thus providing you with virtually limitless technical possibilities. - However, data transmission with KVM-over-IP technology is not compatible with classic KVM extenders from G&D.
