CMPS-24P410GF-XXXXXW — CMPS-24P410GF, L2+ PoE
L2+ Managed PoE Switch – 24 x 10/100/1000Mbps PoE+, and 4 x 1G/2.5G/10Gbps SFP+ Ports
| Brand | DSGIO |
|---|
Part number: CMPS-24P410GF-XXXXXW
( Available with 2 Different Power Ratings, and offered in either a Single Internal Power Supply Model or a Redundant Hot-Swappable Power Module Model )
Overview
INTRODUCTION
The DSGio CMPS-24P410GF Managed PoE Switch is designed for small to medium-scale network deployments, delivering a high-bandwidth, non-blocking switch fabric that enables low-latency, high-speed data transmission. It integrates multi-rate SFP+ uplinks for scalable network expansion and supports link aggregation to maximize throughput.
Equipped with a comprehensive set of IEEE-compliant features, the switch ensures reliable and continuous service for connected IP devices. Advanced Layer 2+ management capabilities, including VLAN, QoS, and security functions, provide efficient network segmentation and traffic prioritization.
Its 19-inch rack-mountable form factor allows seamless integration into standard enterprise and data center environments.
SPECIFICATIONS
Interface | ||
10M/100M/1000Mbps RJ45 Port | 24 | |
1G/2.5G/10Gbps SFP+ Slot | 4 | |
Console Port for CLI Management | 1 | |
System Performance | ||
Packet Buffer | 32Mb | |
NAND Flash Memory | 2Gb | |
NOR Flash Memory | 256Mb | |
SDRAM Memory (DDR3) | 4Gb | |
MAC Address Table Size | 32K | |
Jumbo Frame | 10KB | |
Switching Capacity | 128Gbps | |
Forwarding Rate (64-byte) | 95.232Mpps | |
PoE Features | ||
PoE Power Output | Per Port: IEEE 802.3af/at, Max. 15.4W/30W | |
Number of PSE Port | 24 | |
PoE Type | Port 1-8(AT): End-Span, Mode A MDIX: 1/2(-), 3/6(+) | |
Max. Power Consumption | Refer to Power Supply Unit Bundle Configuration | |
Max. PoE Budget | Refer to Power Supply Unit Bundle Configuration | |
Power Feeding Detecting Capability on PD | ● | |
PD Alive Check | ● | |
PD Classification | ● | |
PoE Scheduling | ● | |
Power Management (Per Port) | Enable / Disable PoE Per Port | ● |
Priority Setting Per Port | ● | |
Power Level Setting Per Port | ● | |
Overloading Protection | ● | |
L2 Features | ||
Auto-Negotiation | ● | |
Auto MDI/MDI-X | ● | |
Flow Control (Duplex) | 802.3x (Full) | ● |
Back-Pressure (Half) | ● | |
Spanning Tree | IEEE 802.1D (STP) | ● |
IEEE 802.1w (RSTP) | ● | |
IEEE 802.1s (MSTP) | ● | |
VLAN | VLAN Group | 4K |
Tagged Based | ● | |
Port-Based | ● | |
Q-in-Q | ● | |
Voice VLAN | Voice VLAN with OUI | |
Link Aggregation | IEEE 802.3ad with LACP | ● |
Static Trunk | ● | |
Max. Static Aggregation Group | 14 | |
Max. Port per Static Agg. Group | 8 | |
IGMP Snooping | IGMP Snooping v1/v2/v3 | Supports 1024 IGMP Groups |
IGMP Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |
IPv6 MLD Snooping | Supports 1024 MLD Groups | |
MLD Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |
Querier, Immediate Leave | ● | |
Storm Control (Broadcast / Multicast / Unknown Unicast) | ● | |
Loop Protection | ● | |
QoS Features | ||
Number of Priority Queue | 8 Queues/Port | |
Rate Limiting | Ingress | Yes, 1 KBps/1pps |
Egress | Yes, 1 KBps/1pps | |
DiffServ (RFC2474 Remarking) | ● | |
Scheduling (WRR, Strict, Hybrid) | ● | |
CoS | IEEE 802.1p | ● |
IP ToS Precedence, IP DSCP | ● | |
Security | ||
Management System User Name / Password Protection | ● | |
User Privilege | Set User Privilege up to 15 Level | |
Port Security (MAC-based) | ● | |
IEEE 802.1x Port-based Access Control | ● | |
ACL (L2/L3/L4) | ● | |
IP Source Guard | ● | |
RADIUS (Authentication, Authorisation, Accounting) | ● | |
TACACS+ | ● | |
HTTP & SSL (Secure Web) | ● | |
SSH v2.0 (Secured Telnet Session) | ● | |
MAC / IP Filter | ● | |
L3 Features | ||
Static Route | ● | |
Management | ||
Command Line Interface (CLI) | ● | |
Web Based Management | ● | |
Telnet | ● | |
Access Management Filtering | SNMP/Web/SSH/Telnet | |
Firmware Upgrade via HTTP | ● | |
Dual Firmware Images | ● | |
Configuration Download / Upload | ● | |
SNMP (v1/v2c/v3) | ● | |
RMON (1, 2, 3 & 9 Groups) | ● | |
DHCP (Server / Client / Relay / Option 82 / Snooping) | ● | |
System Event / Error Log | ● | |
TFTP (Trivial File Transfer Protocol) | ● | |
NTP / LLDP | ● | |
Cable Diagnostics | ● | |
IPv6 Configuration | ● | |
Port Mirroring | ● | |
Physical Characteristics | ||
Dimension (W x H x D) | Internal PSU: 440 x 44 x 330 mm Redundant PSU: 440 x 44 x 330 mm with PSU Handle & Latch Button: 440 x 44 x 360 mm | |
Reset Button | 1 Reset Button for restoring default | |
LED | Power, Speed, Link/ACT., PoE | |
Cooling | Fan Cooling | |
Enclosure | Metal | |
Installation | Desktop / Rack Mount | |
Weight | Refer to Power Supply Unit Bundle Configuration | |
System Power Requirements | ||
System Power Input | 44-57 VDC | |
Max. System Power Consumption | 30W | |
Power Supply Information | ||
Power Supply (520W) | Input: 100-240 V~, 50-60Hz, 8A Max. Output: 54.5VDC/8.52A, 12VDC/5A, 520W Max. | |
Power Supply (600W) | Input: 100-240 V~, 50-60Hz, 8.5A Max. Output: 54.5VDC / 11A, 600W Max. | |
Power Supply (920W) | Input: 100-240 V~, 50-60Hz, 12A Max. Output: 54.5VDC / 16.88A, 920W Max. | |
Environment Limits | ||
Operating Temperature | 0 ~ 50°C | |
Storage Temperature | -20 ~ 80°C | |
Operating Humidity | 10 ~ 90% RH (Non-condensing) | |
Storage Humidity | 10 ~ 90% RH (Non-condensing) | |
Protection and Alarms | ||
ESD | DC Contact 4KV, Air 8KV | |
Surge | AC Line to Line 1KV, Line to Ground 2KV | |
Certifications | ||
Electromagnetic Emissions (EMC) | CE, FCC, UKCA | |
Safety | EN62368-1 | |
Standard | ||
IEEE 802.3 – 10Base-T | ● | |
IEEE 802.3u – 100Base-TX | ● | |
IEEE 802.3ab – 1000Base-T | ● | |
IEEE 802.3z – 1000Base-SX/LX | ● | |
IEEE 802.3ae – 10GBase (SFP+) | ● | |
IEEE 802.3af – Power over Ethernet (PoE) | ● | |
IEEE 802.3at – Power over Ethernet (PoE+) | ● | |
IEEE 802.3az – Energy Efficient Ethernet (EEE) | ● | |
IEEE 802.3x – Flow Control | ● | |
IEEE 802.3ad – Link Aggregation Control Protocol (LACP) | ● | |
IEEE 802.1Q – VLAN Tagging | ● | |
IEEE 802.1v – Protocol-Based VLAN | ● | |
IEEE 802.1p – Class of Service (CoS) | ● | |
IEEE 802.1D – Spanning Tree Protocol (STP) | ● | |
IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP) | ● | |
IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP) | ● | |
IEEE 802.1AB – Link Layer Discovery Protocol (LLDP) | ● | |
IEEE 802.1X – Port-Based Network Access Control | ● | |
ITU-T G.8032/Y.1344 – Ethernet Ring Protection Switching (ERPS) | ● | |
Product Features
· IP Source Guard and Port Security for enhanced access control
· IEEE 802.3af/at PoE, up to 30W per port
· Non-blocking Switching Architecture
· Layer 2+ Fully Managed Features, including MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACACS+, and ACLs
· Integrated DHCP Server, DHCP Relay, and DHCP Snooping
· Support for Voice VLAN and PD Alive Check for improved device monitoring
· Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption
· Multicast Support, including IGMP Snooping (v1/v2/v3), IGMP Proxy, IGMP Querier, MVR, and MLD Snooping (v1/v2)
Power Supply Unit Bundle Configuration
Model No. | Power Source Unit (PSU) | PoE Budget | Weight | Dimension (W x H x D) |
CMPS-24P410GF-520W | 1 (Internal) | 450W | 4.3 Kg | 440 x 44 x 330 mm |
CMPS-24P410GF-600W | 1 (Internal) | 540W | 4.9 Kg | 440 x 44 x 330 mm |
CMPS-24P410GF-RP600W | 2 (Hot-Swap Redundant) | 540W | 5.7 Kg | 440 x 44 x 360 mm |
CMPS-24P410GF-920W | 1 (Internal) | 720W | 4.9 Kg | 440 x 44 x 330 mm |
CMPS-24P410GF-RP920W | 2 (Hot-Swap Redundant) | 720W | 5.7 Kg | 440 x 44 x 360 mm |
Model Name Abbreviation with RP denotes Redundant Power.
Note : Power Supply Redundant is pre-installed in factory and chassis-based. Configuration function for PSUs is not available.
Source: DSGIO — CMPS-24P410GF, L2+ PoE. Verify with manufacturer.
Related products
DSG-HDMI-430C HDMI 1.4, 1080P, Local Out, 1-Way IR, PoC, 70m (DSG-HDMI-430C)
DSGIO's HDMI 1.4, 1080P, Local Out, 1-Way IR, PoC, 70m
This HDMI Video Extender can extend uncompressed high-definition video/audio signal and IR control signals up to 70m (230 feet) for 1080p resolution, and 40m (131 feet) for 4K30 resolution via a single CAT6 cable. It supports EDID copy function (you can choose local or remote EDID) and audio formats up to PCM 7.1, Dolby True HD, and DTS HD.
DSG-USB-EU300 USB 3.2 Gen 1, 5Gbps, 4 USB-A Ports, RS-232, FSYNC, PoC, 100m (DSG-USB-EU300)
DSGIO's USB 3.2 Gen 1, 5Gbps, 4 USB-A Ports, RS-232, FSYNC, PoC, 100m
The USB 3.0 Extender, DSG-USB-EU300, can extend USB signals up to a distance of 100m (328ft) via a single CAT6a cable. The Transmitter features one USB 3.0 Type B input, one FSYNC GPIO input and one RS-232 pass-through. The Receiver features four USB 3.0 Type A outputs, one FSYNC GPIO output and one RS-232 pass-through. Bi-directional 24V PoC is also supported.
IPMX-A4HF-R100CP 4K60 IP Matrix Extender (Receiver Unit) with Local Out, Audio, IR, RS-232, USB 2.0, PoE, 100m (SFP Support Optional)(IPMX-A4HF-R100CP)
Supports Dual 4K60 HDMI Video over Single CATx with 720P Video Return, Audio Embedding/Extracting, Audio, RS-232 and USB 2.0 Extension, 70 ~ 100m. Includes EDID Management Support for Dual 4K, ATC & Medical Resolutions
The Dual-Head HDBaseT 3.0 Extender supports uncompressed True 4K HDMI 2.0 video transmission over distances of 70 to 100 meters with a single CAT6a/7 cable. It handles various resolutions, including 4K@60Hz (4:4:4), 5K, and specialised formats like 2048x2048 and 6MP for medical applications. EDID Management ensures display compatibility, while USB 2.0 extension allows remote access to keyboards, mice, and other devices. It also includes serial extension for integration with control systems. Additional functionalities like audio embedding, extraction, and video return offer versatile AV flexibility.
KEX-HBT3-SH5K90 HDMI Supports Dual KVM Console, Local Out, 720P Video Return, Audio Embedding / Extracting, RS-232 Extension, USB 2.0 Extension, 4K / 5K / ATC / Medical Resolutions (KEX-HBT3-SH5K90)
Supports Dual KVM Console, Local Out, 720P Video Return, Audio Embedding / Extracting, RS-232 Extension, USB 2.0 Extension, 4K / 5K / ATC / Medical Resolutions
The HDBaseT 3.0 extender provides reliable local and remote access up to 70 - 100 meters for true 4K HDMI 2.0 sources over CAT6a/7 cable. It supports popular resolutions, including up to 4K@60Hz (4:4:4), 5K, 2K and 12MP, making it suitable for a range of applications from AV to medical. EDID management ensures seamless compatibility with connected displays. The extender also supports USB 2.0 for remote access to keyboards, mice, and USB devices. Additionally, it features serial extension, audio embedding/extracting, and a local console mode for flexible operation.

