CMS-24P410GF-XXXXXW — CMS-24P410GF, L2+ PoE
L2+ Managed PoE Switch – 8 x 10/100/1000Mbps PoE++, 16 x 10/100/1000Mbps PoE+, and 4 x 1G/2.5G/10Gbps SFP+ Ports
| Brand | DSGIO |
|---|
Part number: CMS-24P410GF-XXXXXW
( Available with 3 Different Power Ratings, and offered in either a Single Internal Power Supply Model or a Redundant Hot-Swappable Power Module Model )
Overview
INTRODUCTION
The DSGio CMS-24P410GF managed PoE switch is built for diverse network deployments, offering a high-bandwidth, non-blocking switch fabric to ensure low-latency, high-speed data transmission. It features multi-rate uplink ports for flexible and scalable network expansion, along with link aggregation to boost overall throughput.
With IEEE 802.3af/at/bt PoE support, it delivers reliable power to connected IP devices. Advanced Layer 2+ management functions—including VLAN, QoS, and robust security features—enable efficient network segmentation and traffic optimization. Its 19-inch rack-mountable form factor allows seamless integration into standard enterprise and data center environments.
SPECIFICATIONS
Interface | ||
10M/100M/1000Mbps RJ45 Port | 24 | |
1G/2.5G/10Gbps SFP+ Slot | 4 | |
RJ45 Console Port for CLI Management | 1 | |
System Performance | ||
Packet Buffer | 32Mb | |
NAND Flash Memory | 2Gb | |
NOR Flash Memory | 256Mb | |
SDRAM Memory (DDR3) | 4Gb | |
MAC Address Table Size | 32K | |
Jumbo Frame | 10KB | |
Switching Capacity | 128Gbps | |
Forwarding Rate (64-byte) | 95.232Mpps | |
Power over Ethernet | ||
PoE Power Output | Port 1 – 8 : IEEE 802.3af/at/bt, 90W Max. Port 9 – 24: IEEE 802.3af/at, 30W Max. | |
PoE Power Type | Port 1-8(BT): End-Span, Type 4: 3/4/5/6(+), 1/2/7/8(-) Port 9-24(AT): End-Span, Mode A: 1/2(+), 3/6(-) | |
Max. Power Consumption | Refer to Power Supply Unit Bundle Configuration | |
Max. PoE Budget | Refer to Power Supply Unit Bundle Configuration | |
Power Feeding Detecting Capability on PD | ● | |
PD Alive Check | ● | |
PD Classification | ● | |
PoE Scheduling | ● | |
Power Management (Per Port) | Enable/Disable PoE Per Port | ● |
Priority Setting Per Port | ● | |
Power Level Setting Per Port | ● | |
Overloading Protection | ● | |
L2 Features | ||
Auto-Negotiation | ● | |
Auto MDI/MDI-X | ● | |
Flow Control (Duplex) | 802.3x (Full) | ● |
Back-Pressure (Half) | ● | |
Spanning Tree | IEEE 802.1D (STP) | ● |
IEEE 802.1w (RSTP) | ● | |
IEEE 802.1s (MSTP) | ● | |
VLAN | VLAN Group | 4K |
Tagged Based | ● | |
Port-Based | ● | |
Q-in-Q | ● | |
Voice VLAN | Voice VLAN with OUI | |
Link Aggregation | IEEE 802.3ad with LACP | ● |
Static Trunk | ● | |
Max. Static Aggregation Group | 14 | |
Max. Port per Static Agg. Group | 8 | |
IGMP Snooping | IGMP Snooping v1/v2/v3 | Supports 1024 IGMP Groups |
IGMP Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |
IPv6 MLD Snooping | Supports 1024 MLD Groups | |
MLD Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |
Querier, Immediate Leave | ● | |
Storm Control (Broadcast / Multicast / Unknown Unicast) | ● | |
Loop Protection | ● | |
QoS Features | ||
Number of Priority Queue | 8 Queues/Port | |
Rate Limiting | Ingress | Yes, 1 KBps/1pps |
Egress | Yes, 1 KBps/1pps | |
DiffServ (RFC2474 Remarking) | ● | |
Scheduling (WRR, Strict, Hybrid) | ● | |
CoS | IEEE 802.1p | ● |
IP ToS Precedence, IP DSCP | ● | |
Security | ||
Management System User Name / Password Protection | ● | |
User Privilege | Set User Privilege up to 15 Level | |
Port Security (MAC-based) | ● | |
IEEE 802.1x Port-based Access Control | ● | |
ACL (L2/L3/L4) | ● | |
IP Source Guard | ● | |
RADIUS (Authentication, Authorisation, Accounting) | ● | |
TACACS+ | ● | |
HTTP & SSL (Secure Web) | ● | |
SSH v2.0 (Secured Telnet Session) | ● | |
MAC / IP Filter | ● | |
L3 Features | ||
Static Route | ● | |
Management | ||
Command Line Interface (CLI) | ● | |
Web Based Management | ● | |
Telnet | ● | |
Access Management Filtering | SNMP/Web/SSH/Telnet | |
Firmware Upgrade via HTTP | ● | |
Dual Firmware Images | ● | |
Configuration Download / Upload | ● | |
SNMP (v1/v2c/v3) | ● | |
RMON (1, 2, 3 & 9 Groups) | ● | |
DHCP (Server / Client / Relay / Option 82 / Snooping) | ● | |
System Event / Error Log | ● | |
TFTP (Trivial File Transfer Protocol) | ● | |
NTP / LLDP | ● | |
Cable Diagnostics | ● | |
IPv6 Configuration | ● | |
Port Mirroring | ● | |
Physical Characteristics | ||
Dimension (W x H x D) | Internal PSU: 440 x 44 x 330 mm Redundant PSU: 440 x 44 x 330 mm with PSU Handle & Latch Button: 440 x 44 x 360 mm | |
Reset Button | 1 Reset Button for restoring default | |
LED | Power, Speed, Link/ACT.,PoE | |
Cooling | Fan Cooling | |
Enclosure | Metal | |
Installation | Desktop / Rack Mount | |
Weight | Refer to Power Supply Unit Bundle Configuration | |
System Power Requirements | ||
System Power Input | 44-57 VDC | |
Max. System Power Consumption | 30W | |
Power Supply Information | ||
Power Supply (600W) | Input : 100-240 V~, 50-60Hz, 8.5A Max. | |
Output : 54.5VDC / 11A, 600W Max. | ||
Power Supply (920W) | Input : 100-240 V~, 50-60Hz, 12A Max. | |
Output : 54.5VDC / 16.88A, 920W Max. | ||
Power Supply (1200W) | Input : 100-240V~, 50-60Hz, 12A Max. | |
Output : 54.5VDC / 22A, 1200W Max. | ||
Environment Limits | ||
Operating Temperature | 0 ~ 50°C | |
Storage Temperature | -20 ~ 80°C | |
Operating Humidity | 10 ~ 90% RH (Non-condensing) | |
Storage Humidity | 10 ~ 90% RH (Non-condensing) | |
Protection and Alarms | ||
ESD | DC Contact 4KV, Air 8KV | |
Surge | AC Line to Line 1KV, Line to Ground 2KV | |
Certifications | ||
Electromagnetic Emissions (EMC) | CE, FCC, UKCA | |
Safety | EN62368-1 | |
Standard | ||
IEEE 802.3 – 10Base-T | ● | |
IEEE 802.3u – 100Base-TX | ● | |
IEEE 802.3ab – 1000Base-T | ● | |
IEEE 802.3z – 1000Base-SX/LX | ● | |
IEEE 802.3ae – 10GBase (SFP+) | ● | |
IEEE 802.3af – Power over Ethernet (PoE) | ● | |
IEEE 802.3at – Power over Ethernet (PoE+) | ● | |
IEEE 802.3bt – Power over Ethernet (PoE++) | ● | |
IEEE 802.3az – Energy Efficient Ethernet (EEE) | ● | |
IEEE 802.3x – Flow Control | ● | |
IEEE 802.3ad – Link Aggregation Control Protocol (LACP) | ● | |
IEEE 802.1Q – VLAN Tagging | ● | |
IEEE 802.1v – Protocol-Based VLAN | ● | |
IEEE 802.1p – Class of Service (CoS) | ● | |
IEEE 802.1D – Spanning Tree Protocol (STP) | ● | |
IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP) | ● | |
IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP) | ● | |
IEEE 802.1AB – Link Layer Discovery Protocol (LLDP) | ● | |
IEEE 802.1X – Port-Based Network Access Control | ● | |
ITU-T G.8032/Y.1344 – Ethernet Ring Protection Switching (ERPS) | ● | |
Product Features
· IP Source Guard and Port Security for enhanced access control
· IEEE 802.3af/at/bt PoE support, delivering up to 90W or 30W per port
· Non-blocking Switching Architecture
· Layer 2+ Fully Managed Features, including MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACACS+, and ACLs
· Integrated DHCP Server, DHCP Relay, and DHCP Snooping
· Support for Voice VLAN and PD Alive Check for improved device monitoring
· Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption
· Multicast Support, including IGMP Snooping (v1/v2/v3), IGMP Proxy, IGMP Querier, MVR, and MLD Snooping (v1/v2)
Power Supply Unit Bundle Configuration
Model No. | Power Source Unit (PSU) | PoE Budget | Weight | Dimension (W x H x D) |
CMS-24P410GF-600W | 1 | 540W | 4.9 Kg | 440 x 44 x 330 mm |
CMS-24P410GF-RP600W | 2 (Hot-Swappable Redundant PSU) | 540W | 5.7 Kg | 440 x 44 x 360 mm |
CMS-24P410GF-920W | 1 | 860W | 4.9 Kg | 440 x 44 x 330 mm |
CMS-24P410GF-RP920W | 2 (Hot-Swappable Redundant PSU) | 860W | 5.7 Kg | 440 x 44 x 360 mm |
CMS-24P410GF-1200W | 1 | 1140W | 4.9 Kg | 440 x 44 x 330 mm |
CMS-24P410GF-RP1200W | 2 (Hot-Swappable Redundant PSU) | 1140W | 5.7 Kg | 440 x 44 x 360 mm |
Model Name Abbreviation with RP denotes Redundant Power.
Note :
1. The RP switch hardware design supports dual redundant power supplies. This feature is hardware-based and not user-configurable.
2. 600W PSU, 540W PoE budget: suitable only if every powered device conforms to IEEE 802.3af and total power draw will remain below 540W. If any device requires higher PoE (e.g., 802.3at/at+), or you want redundancy/headroom, choose a higher-capacity PSU.
Source: DSGIO — CMS-24P410GF, L2+ PoE. Verify with manufacturer.
Related products
DSG-KEX-150SK HDMI 2.0b, 4K60, 2-Way IR, USB 1.1, PoC, 120m (DSG-KEX-150SK)
DSGIO's HDMI 2.0b, 4K60, 2-Way IR, USB 1.1, PoC, 120m
This 18Gbps HDMI KVM Extender extends 4K60 HDMI signals, bi-directional IR control signals, and USB 1.1 KVM signals up to 120m (394 feet), and 150m (492 feet) for 1080P signal, using a single CAT6/6a cable. The device converts HDMI signals to standard HDBaseT signals for transmission over LAN cable. Through the bi-directional IR signals pass-through function, users can easily control signal source device or display device remotely, and supports Power Over Cable (PoC)
DSG-USB-EU300 USB 3.2 Gen 1, 5Gbps, 4 USB-A Ports, RS-232, FSYNC, PoC, 100m (DSG-USB-EU300)
DSGIO's USB 3.2 Gen 1, 5Gbps, 4 USB-A Ports, RS-232, FSYNC, PoC, 100m
The USB 3.0 Extender, DSG-USB-EU300, can extend USB signals up to a distance of 100m (328ft) via a single CAT6a cable. The Transmitter features one USB 3.0 Type B input, one FSYNC GPIO input and one RS-232 pass-through. The Receiver features four USB 3.0 Type A outputs, one FSYNC GPIO output and one RS-232 pass-through. Bi-directional 24V PoC is also supported.
KEX-HBT3-DH90 Dual-Head HDBaseT 3.0 Extender (KEX-HBT3-DH90)
Supports Dual 4K60 HDMI Video over Single CATx with 720P Video Return, Audio Embedding/Extracting, Audio, RS-232 and USB 2.0 Extension, 70 ~ 100m. Includes EDID Management Support for Dual 4K, ATC & Medical Resolutions
The Dual-Head HDBaseT 3.0 Extender supports uncompressed True 4K HDMI 2.0 video transmission over distances of 70 to 100 meters with a single CAT6a/7 cable. It handles various resolutions, including 4K@60Hz (4:4:4), 5K, and specialised formats like 2048x2048 and 6MP for medical applications. EDID Management ensures display compatibility, while USB 2.0 extension allows remote access to keyboards, mice, and other devices. It also includes serial extension for integration with control systems. Additional functionalities like audio embedding, extraction, and video return offer versatile AV flexibility.
KMS-U204 4 Ports KM (USB) Switch with USB HID, USB 2.0, Audio and Hotkey Switching, and Mouse Roaming function (KMS-U204)
4 Ports KM (USB) Switch with USB HID, USB 2.0, Audio and Hotkey Switching, and Mouse Roaming function
The KM (USB) Switch, KMS-U204, allows users to share one set of keyboard, mouse, audio, and USB peripherals among 4 USB computers. Simply press a button, issue hotkey commands or move the mouse cursor across the screen borders to select your desired PC for access control.

