CMPS-8P210GF-250W or CMPS-8P210GF-310W — CMPS-8P210GF, L2+ PoE
L2+ Managed PoE Switch – 8 x 10/100/1000Mbps PoE+, and 2 x 1G/2.5G/10Gbps SFP+ Ports
| Brand | DSGIO |
|---|
Part number: CMPS-8P210GF-250W or CMPS-8P210GF-310W
( Model Options: PoE Budget 180W or 240W )
Overview
INTRODUCTION
The DSGio CMPS-8P210GF Managed PoE Switch is designed for small to medium-scale network deployments, delivering a high-bandwidth, non-blocking switch fabric that enables low-latency, high-speed data transmission. It integrates multi-rate SFP+ uplinks for scalable network expansion and supports link aggregation to maximize throughput.
Equipped with a comprehensive set of IEEE-compliant features, the switch ensures reliable and continuous service for connected IP devices. Advanced Layer 2+ management capabilities, including VLAN, QoS, and security functions, provide efficient network segmentation and traffic prioritization.
Its 19-inch rack-mountable form factor allows seamless integration into standard enterprise and data center environments.
SPECIFICATIONS
Interface | ||
10M/100M/1000Mbps RJ45 Port | 8 | |
1G/2.5G/10Gbps SFP+ Slot | 2 | |
Console Port for CLI Management | 1 | |
System Performance | ||
Packet Buffer | 16Mb | |
NOR Flash Memory | 512Mb | |
SDRAM Memory (DDR3) | 4Gb | |
MAC Address Table Size | 32K | |
Jumbo Frame | 10KB | |
Switching Capacity | 56Gbps | |
Forwarding Rate (64-byte) | 41.664Mpps | |
PoE Features | ||
PoE Power Output | Per Port: IEEE 802.3af/at, Max. 15.4W/30W | |
Number of PSE Port | 8 | |
PoE Type | End-Span, Mode A MDIX: 1/2(-), 3/6(+) | |
Max. Power Consumption | 250W / 310W | |
Max. PoE Budget | 180W / 240W | |
External/Internal Power | Internal Power | |
Power Feeding Detecting Capability on PD | ● | |
PD Alive Check | ● | |
PD Classification | ● | |
PoE Scheduling | ● | |
Power Management (Per Port) | Enable / Disable PoE Per Port | ● |
Priority Setting Per Port | ● | |
Power Level Setting Per Port | ● | |
Overloading Protection | ● | |
L2 Features | ||
Auto-Negotiation | ● | |
Auto MDI/MDI-X | ● | |
Flow Control (Duplex) | 802.3x (Full) | ● |
Back-Pressure (Half) | ● | |
Spanning Tree | IEEE 802.1D (STP) | ● |
IEEE 802.1w (RSTP) | ● | |
IEEE 802.1s (MSTP) | ● | |
VLAN | VLAN Group | 4K |
Tagged Based | ● | |
Port-Based | ● | |
Q-in-Q | ● | |
Voice VLAN | Voice VLAN with OUI | |
Link Aggregation | IEEE 802.3ad with LACP | ● |
Static Trunk | ● | |
Max. Static Aggregation Group | 5 | |
Max. Port per Static Agg. Group | 8 | |
IGMP Snooping | IGMP Snooping v1/v2/v3 | Supports 1024 IGMP Groups |
IGMP Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |
IPv6 MLD Snooping | Supports 1024 MLD Groups | |
MLD Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |
Querier, Immediate Leave | ● | |
Storm Control (Broadcast / Multicast / Unknown Unicast) | ● | |
Loop Protection | ● | |
QoS Features | ||
Number of Priority Queue | 8 Queues/Port | |
Rate Limiting | Ingress | Yes, 1 KBps/1pps |
Egress | Yes, 1 KBps/1pps | |
DiffServ (RFC2474 Remarking) | ● | |
Scheduling (WRR, Strict, Hybrid) | ● | |
CoS | IEEE 802.1p | ● |
IP ToS Precedence, IP DSCP | ● | |
Security | ||
Management System User Name / Password Protection | ● | |
User Privilege | Set User Privilege up to 15 Level | |
Port Security (MAC-based) | ● | |
IEEE 802.1x Port-based Access Control | ● | |
ACL (L2/L3/L4) | ● | |
IP Source Guard | ● | |
RADIUS (Authentication, Authorisation, Accounting) | Authentication/Accounting | |
TACACS+ | Authentication | |
HTTP & SSL (Secure Web) | ● | |
SSH v2.0 (Secured Telnet Session) | ● | |
MAC / IP Filter | ● | |
L3 Features | ||
Static Route | ● | |
Management | ||
Command Line Interface (CLI) | ● | |
Web Based Management | ● | |
Telnet | ● | |
Access Management Filtering | SNMP/Web/SSH/Telnet | |
Firmware Upgrade via HTTP | ● | |
Dual Firmware Images | ● | |
Configuration Download / Upload | ● | |
SNMP (v1/v2c/v3) | ● | |
RMON (1, 2, 3 & 9 Groups) | ● | |
DHCP (Server / Client / Relay / Option 82 / Snooping) | ● | |
System Event / Error Log | ● | |
TFTP (Trivial File Transfer Protocol) | ● | |
NTP / LLDP | ● | |
Cable Diagnostics | ● | |
IPv6 Configuration | ● | |
Port Mirroring | ● | |
Physical Characteristics | ||
Dimension (W x H x D) | 330 x 44 x 210 mm | |
Reset Button | 1 Reset Button for restoring default | |
LED | Power, Link/ACT., PoE | |
Cooling | Fan Cooling | |
Enclosure | Metal | |
Installation | Desktop / Rack Mount | |
Weight | 2.4Kg | |
System Power Requirements | ||
System Power Input | 44-57 VDC | |
Max. System Power Consumption | 20W | |
Power Supply Information | ||
Power Supply (250W) | Input: 100-240 V~, 50-60Hz, 5A Max. Output: 56VDC / 4.46A, 250W Max. | |
Power Supply (310W) | Input: 100-240 V~, 50-60Hz, 5A Max. Output: 54VDC / 5.74A, 310W Max. | |
Environment Limits | ||
Operating Temperature | 0 ~ 50°C | |
Storage Temperature | -20 ~ 80°C | |
Operating Humidity | 10 ~ 90% RH (Non-condensing) | |
Storage Humidity | 10 ~ 90% RH (Non-condensing) | |
Protection and Alarms | ||
ESD | DC Contact 4KV, Air 8KV | |
Surge | AC Line to Line 1KV, Line to Ground 2KV | |
Certifications | ||
Electromagnetic Emissions (EMC) | CE, FCC, UKCA | |
Safety | EN62368-1 | |
Standard | ||
IEEE 802.3 – 10Base-T | ● | |
IEEE 802.3u – 100Base-TX | ● | |
IEEE 802.3ab – 1000Base-T | ● | |
IEEE 802.3z – 1000Base-SX/LX | ● | |
IEEE 802.3ae – 10GBase (SFP+) | ● | |
IEEE 802.3af – Power over Ethernet (PoE) | ● | |
IEEE 802.3at – Power over Ethernet (PoE+) | ● | |
IEEE 802.3az – Energy Efficient Ethernet (EEE) | ● | |
IEEE 802.3x – Flow Control | ● | |
IEEE 802.3ad – Link Aggregation Control Protocol (LACP) | ● | |
IEEE 802.1Q – VLAN Tagging | ● | |
IEEE 802.1v – Protocol-Based VLAN | ● | |
IEEE 802.1p – Class of Service (CoS) | ● | |
IEEE 802.1D – Spanning Tree Protocol (STP) | ● | |
IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP) | ● | |
IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP) | ● | |
IEEE 802.1AB – Link Layer Discovery Protocol (LLDP) | ● | |
IEEE 802.1X – Port-Based Network Access Control | ● | |
ITU-T G.8032/Y.1344 – Ethernet Ring Protection Switching (ERPS) | ● (Optional) | |
Product Features
· IP Source Guard and Port Security for enhanced access control
· IEEE 802.3af/at PoE, up to 30W per port
· Maximum PoE Budget of 180W model to support 802.3af devices or 240W model to support 802.3at devices.
· Non-blocking Switching Architecture
· Layer 2+ Fully Managed Features, including MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACACS+, and ACLs
· Integrated DHCP Server, DHCP Relay, and DHCP Snooping
· Support for Voice VLAN and PD Alive Check for improved device monitoring
· Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption
· Multicast Support, including IGMP Snooping (v1/v2/v3), IGMP Proxy, IGMP Querier, MVR, and MLD Snooping (v1/v2)
Source: DSGIO — CMPS-8P210GF, L2+ PoE. Verify with manufacturer.
Related products
DSG-HDMI-430C HDMI 1.4, 1080P, Local Out, 1-Way IR, PoC, 70m (DSG-HDMI-430C)
DSGIO's HDMI 1.4, 1080P, Local Out, 1-Way IR, PoC, 70m
This HDMI Video Extender can extend uncompressed high-definition video/audio signal and IR control signals up to 70m (230 feet) for 1080p resolution, and 40m (131 feet) for 4K30 resolution via a single CAT6 cable. It supports EDID copy function (you can choose local or remote EDID) and audio formats up to PCM 7.1, Dolby True HD, and DTS HD.
DSG-HDMI-460SMF HDMI 2.0b, 4K60, Local Out, 2-Way IR, RS-232, SM Fiber, 10Km (DSG-HDMI-460SMF)
DSGIO's HDMI 2.0b, 4K60, Local Out, 2-Way IR, RS-232, PoC, 120m
This 18Gbps HDMI Video Extender can transmit 4K@60Hz video and audio signals, RS-232, bidirectional IR, over distances up to 120m (394 feet) between the Transmitter and Receiver using a single CATx cable. The Extender features an HDMI loop-out port for additional output and supports audio de-embedding for L/R audio output. Additionally, the Extender supports two-way IR pass-through, enabling control of both the source and display devices, and also supports Power over Cable functionality.
IPMX-A4HF-R100CP 4K60 IP Matrix Extender (Receiver Unit) with Local Out, Audio, IR, RS-232, USB 2.0, PoE, 100m (SFP Support Optional)(IPMX-A4HF-R100CP)
Supports Dual 4K60 HDMI Video over Single CATx with 720P Video Return, Audio Embedding/Extracting, Audio, RS-232 and USB 2.0 Extension, 70 ~ 100m. Includes EDID Management Support for Dual 4K, ATC & Medical Resolutions
The Dual-Head HDBaseT 3.0 Extender supports uncompressed True 4K HDMI 2.0 video transmission over distances of 70 to 100 meters with a single CAT6a/7 cable. It handles various resolutions, including 4K@60Hz (4:4:4), 5K, and specialised formats like 2048x2048 and 6MP for medical applications. EDID Management ensures display compatibility, while USB 2.0 extension allows remote access to keyboards, mice, and other devices. It also includes serial extension for integration with control systems. Additional functionalities like audio embedding, extraction, and video return offer versatile AV flexibility.
KEX-HBT3-DH90 Dual-Head HDBaseT 3.0 Extender (KEX-HBT3-DH90)
Supports Dual 4K60 HDMI Video over Single CATx with 720P Video Return, Audio Embedding/Extracting, Audio, RS-232 and USB 2.0 Extension, 70 ~ 100m. Includes EDID Management Support for Dual 4K, ATC & Medical Resolutions
The Dual-Head HDBaseT 3.0 Extender supports uncompressed True 4K HDMI 2.0 video transmission over distances of 70 to 100 meters with a single CAT6a/7 cable. It handles various resolutions, including 4K@60Hz (4:4:4), 5K, and specialised formats like 2048x2048 and 6MP for medical applications. EDID Management ensures display compatibility, while USB 2.0 extension allows remote access to keyboards, mice, and other devices. It also includes serial extension for integration with control systems. Additional functionalities like audio embedding, extraction, and video return offer versatile AV flexibility.
KXF-DCV-200C VGA KVM Extender, Dual Station, Audio, IR, RS-232, USB HID, 200m (KXF-DCV-200C)
DSGIO's VGA KVM Extender with Dual Station, Dual-User Access, Audio, IR, RS-232, USB HID, 200m
The VGA KVM Extender over CAT5, KXF-DCV-200C, consists of a Console and a Computer unit that allows you to extend VGA, Audio, IR, Serial and USB HID signals up to 200 meters (656 feet) over CATx cabling. The dual station feature enables users to set up two PCs in different locations: one on the Console side and the other on the PC side.

