CMS-48P410GF-XXXXXW — CMS-48P410GF, L2+ PoE
L2+ Managed PoE Switch – 12 x 10/100/1000Mbps PoE++, 36 x 10/100/1000Mbps PoE+, and 4 x 1G/2.5G/10Gbps SFP+ Ports
| Brand | DSGIO |
|---|
Part number: CMS-48P410GF-XXXXXW
( Available with 2 Different Power Ratings, and offered in either Single Power Supply Unit Model, Redundant Hot-Swappable Power Module Model or Current Shared Power Module Model )
Overview
INTRODUCTION
The DSGio CMS-48P410GF managed PoE switch is built for diverse network deployments, offering a high-bandwidth, non-blocking switch fabric to ensure low-latency, high-speed data transmission. It features multi-rate uplink ports for flexible and scalable network expansion, along with link aggregation to boost overall throughput.
With IEEE 802.3af/at/bt PoE support, it delivers reliable power to connected IP devices. Advanced Layer 2+ management functions—including VLAN, QoS, and robust security features—enable efficient network segmentation and traffic optimization. Its 19-inch rack-mountable form factor allows seamless integration into standard enterprise and data center environments.
SPECIFICATIONS
Interface | ||||
10M/100M/1000Mbps RJ45 Port | 48 | |||
1G/2.5G/10Gbps SFP+ Slot | 4 | |||
RJ45 Console Port for CLI Management | 1 | |||
System Performance | ||||
Packet Buffer | 32Mb | |||
SDRAM Memory (DDR3) | 16Gb | |||
NOR Flash Memory | 256Mb | |||
NAND Flash Memory | 2Gb | |||
MAC Address Table Size | 32K | |||
Jumbo Frame | 10KB | |||
Switching Capacity | 176Gbps | |||
Forwarding Rate (64-byte) | 130.944Mpps | |||
Power over Ethernet | ||||
PoE Power Output | Port 1 – 12 : IEEE 802.3bt, 90W Max. | |||
Port 13 – 48 : IEEE 802.3at, 30W Max. | ||||
PoE Power Type | IEEE 802.3at : End-Span, Mode A, 1/2(+), 3/6(-) | |||
IEEE 802.3bt : End-Span, Type 4, 3/4/5/6(+), 1/2/7/8(-) | ||||
L2 Features | ||||
Auto-Negotiation | ● | |||
Auto MDI/MDI-X | ● | |||
Flow Control (Duplex) | 802.3x (Full) | ● | ||
Back-Pressure (Half) | ● | |||
Spanning Tree | IEEE 802.1D (STP) | ● | ||
IEEE 802.1w (RSTP) | ● | |||
IEEE 802.1s (MSTP) | ● | |||
VLAN | VLAN Group | 4K | ||
Tagged Based | ● | |||
Port-Based | ● | |||
Voice VLAN | Voice VLAN with OUI | |||
Link Aggregation | IEEE 802.3ad with LACP | ● | ||
Static Trunk | ● | |||
Max. Static Aggregation Group | 26 | |||
Max. Port per Static Agg. Group | 16 | |||
IGMP Snooping | IGMP Snooping v1/v2/v3 | Supports 1024 IGMP Groups | ||
IGMP Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |||
IPv6 MLD Snooping | Supports 1024 MLD Groups | |||
MLD Static Multicast Addresses | Supports 1024 Static Multicast Addresses | |||
Querier, Immediate Leave | ● | |||
Storm Control (Broadcast / Multicast / Unknown Unicast) | ● | |||
Loop Protection | ● | |||
QoS Features | ||||
Number of Priority Queue | 8 Queues/Port | |||
Rate Limiting | Ingress | Yes, 1 KBps/1pps | ||
Egress | Yes, 1 KBps/1pps | |||
DiffServ (RFC2474 Remarking) | ● | |||
Scheduling (WRR, Strict, Hybrid) | ● | |||
CoS | IEEE 802.1p | ● | ||
IP ToS Precedence, IP DSCP | ● | |||
Security | ||||
Management System User Name / Password Protection | ● | |||
User Privilege | Set User Privilege up to 15 Level | |||
Port Security (MAC-based) | ● | |||
IEEE 802.1x Port-based Access Control | ● | |||
ACL (L2/L3/L4) | ● | |||
IP Source Guard | ● | |||
RADIUS (Authentication, Authorisation, Accounting) | ● | |||
TACACS+ | ● | |||
HTTP & SSL (Secure Web) | ● | |||
SSH v2.0 (Secured Telnet Session) | ● | |||
MAC / IP Filter | ● | |||
Management | ||||
Command Line Interface (CLI) | ● | |||
Web Based Management | ● | |||
Telnet | ● | |||
Access Management Filtering | SNMP/Web/SSH/Telnet | |||
Firmware Upgrade via HTTP | ● | |||
Dual Firmware Images | ● | |||
Configuration Download / Upload | ● | |||
SNMP (v1/v2c/v3) | ● | |||
RMON (1, 2, 3 & 9 Groups) | ● | |||
DHCP (Server / Client / Relay / Option 82 / Snooping) | ● | |||
System Event / Error Log | ● | |||
TFTP (Trivial File Transfer Protocol) | ● | |||
NTP / LLDP | ● | |||
Cable Diagnostics | ● | |||
IPv6 Configuration | ● | |||
Port Mirroring | ● | |||
Physical Characteristics | ||||
Dimension (W x H x D) | 440 x 44 x 382/410 mm (CRPS) | |||
LED Indicator | Power (Amber) | On / Off | Power On / Off | |
PoE (Amber) | On / Off / Blinking | PoE On / Off / PD Fault | ||
Link/Act. (Green) | On / Flashing | Link / Transmitting | ||
Reset Button | 1 | |||
Cooling | Fan Cooling | |||
Enclosure | Metal | |||
Installation | Rack Mount | |||
Weight | 1 CRPS | 5.5Kg (TBC) | ||
2 CRPS | 6.5Kg (TBC) | |||
System Power Requirements | ||||
System Power Input | 100-240 V~, 50-60Hz | |||
Max. System Power Consumption | 45W | |||
Environment Limits | ||||
Operating Temperature | 0 ~ 50°C | |||
Storage Temperature | -20 ~ 80°C | |||
Humidity | 10 ~ 90% RH (Non-condensing) | |||
Certifications and Protection | ||||
ESD | DC Contact 4KV, Air 8KV | |||
Surge | AC Line to Line 1KV, Line to Ground 2KV | |||
Electromagnetic Emissions (EMC) | CE, FCC, UKCA Class A | |||
Standard | ||||
IEEE 802.3 – 10Base-T | ● | |||
IEEE 802.3u – 100Base-TX | ● | |||
IEEE 802.3ab – 1000Base-T | ● | |||
IEEE 802.3z – 1000Base-SX/LX | ● | |||
IEEE 802.3ae – 10GBase (SFP+) | ● | |||
IEEE 802.3af – Power over Ethernet (PoE) | ● | |||
IEEE 802.3at – Power over Ethernet (PoE+) | ● | |||
IEEE 802.3bt – Power over Ethernet (PoE++) | ● | |||
IEEE 802.3az – Energy Efficient Ethernet (EEE) | ● | |||
IEEE 802.3x – Flow Control | ● | |||
IEEE 802.3ad – Link Aggregation Control Protocol (LACP) | ● | |||
IEEE 802.1Q – VLAN Tagging | ● | |||
IEEE 802.1v – Protocol-Based VLAN | ● | |||
IEEE 802.1p – Class of Service (CoS) | ● | |||
IEEE 802.1D – Spanning Tree Protocol (STP) | ● | |||
IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP) | ● | |||
IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP) | ● | |||
IEEE 802.1AB – Link Layer Discovery Protocol (LLDP) | ● | |||
IEEE 802.1X – Port-Based Network Access Control | ● | |||
ITU-T G.8032/Y.1344 – Ethernet Ring Protection Switching (ERPS) | ● | |||
Product Features
· IP Source Guard and Port Security for enhanced access control
· IEEE 802.3af/at/bt PoE support, delivering up to 90W or 30W per port
· Non-blocking Switching Architecture
· Layer 2+ Fully Managed Features, including MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACACS+, and ACLs
· Integrated DHCP Server, DHCP Relay, and DHCP Snooping
· Support for Voice VLAN and PD Alive Check for improved device monitoring
· Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption
· Multicast Support, including IGMP Snooping (v1/v2/v3), IGMP Proxy, IGMP Querier, MVR, and MLD Snooping (v1/v2)
Power Supply Unit Bundle Configuration
Model No. | Power Source Unit (PSU) | PoE Port | PoE Budget |
CMS-48P410GF-920W | 1 | 12BT + 16AT | 860W |
CMS-48P410GF-RP920W | 2 (Redundant) | 12BT + 16AT | 860W |
CMS-48P410GF-CS1840W | 2 (Shared) | 12BT + 16AT | 1780W |
CMS-48P410GF-1200W | 1 | 12BT + 16AT | 1140W |
CMS-48P410GF-RP1200W | 2 (Redundant) | 12BT + 16AT | 1140W |
CMS-48P410GF-CS2400W | 2 (Shared) | 12BT + 16AT | 2160W |
Model Name Abbreviation with RP denotes Redundant Power, and CS denotes Current Shared
Note : The RP and CS switch hardware design supports dual power supplies. This feature is hardware-based and not user-configurable.
Source: DSGIO — CMS-48P410GF, L2+ PoE. Verify with manufacturer.
Related products
DSG-HDMI-460C HDMI 2.0b, 4K60, Local Out, 2-Way IR, PoC, 70m (DSG-HDMI-460C)
DSGIO's HDMI 2.0b, 4K60, Local Out, 2-Way IR, PoC, 70m
This 18Gbps HDMI Video Extender can extend 4K@60Hz HDMI signals and IR control signal up to 70m (230 feet) via a single CAT6/6a cable, achieving zero-delay, uncompressed long-distance transmission between the Transmitter unit and Receiver unit. It features EDID copy pass-through functionality between the source device and display device, as well as PoC functionality.
DSG-HDMI-460LR HDMI 2.0b, 4K60, Local Out, 2-Way IR, RS-232, PoC, 120m (DSG-HDMI-460LR)
DSGIO's HDMI 2.0b, 4K60, Local Out, 2-Way IR, RS-232, PoC, 120m
This 18Gbps HDMI Video Extender can transmit 4K@60Hz video and audio signals, RS-232, bidirectional IR, over distances up to 120m (394 feet) between the Transmitter and Receiver using a single CATx cable. The Extender features an HDMI loop-out port for additional output and supports audio de-embedding for L/R audio output. Additionally, the Extender supports two-way IR pass-through, enabling control of both the source and display devices, and also supports Power over Cable functionality.
KEX-HBT3-DH90 Dual-Head HDBaseT 3.0 Extender (KEX-HBT3-DH90)
Supports Dual 4K60 HDMI Video over Single CATx with 720P Video Return, Audio Embedding/Extracting, Audio, RS-232 and USB 2.0 Extension, 70 ~ 100m. Includes EDID Management Support for Dual 4K, ATC & Medical Resolutions
The Dual-Head HDBaseT 3.0 Extender supports uncompressed True 4K HDMI 2.0 video transmission over distances of 70 to 100 meters with a single CAT6a/7 cable. It handles various resolutions, including 4K@60Hz (4:4:4), 5K, and specialised formats like 2048x2048 and 6MP for medical applications. EDID Management ensures display compatibility, while USB 2.0 extension allows remote access to keyboards, mice, and other devices. It also includes serial extension for integration with control systems. Additional functionalities like audio embedding, extraction, and video return offer versatile AV flexibility.
KEX-HBT3-SD90P 4K60 DisplayPort HDBaseT 3.0 KVM Extender, Dual Console, Audio, RS-232, USB 2.0, PoH, 90m (KEX-HBT3-SH90P)
DSGIO's 4K60 DisplayPort HDBaseT 3.0 KVM Extender with Dual Console, Dual-User Access, Local Out, Audio Embedding/Extracting, RS-232, USB 2.0, PoH, 90m
The DisplayPort HDBaseT 3.0 KVM Extender, KEX-HBT3-SD90P, consists of a Transmitter (Host/PC) and a Receiver (USB Device) unit. It allows you to extend DisplayPort/HDMI, USB 2.0, 3.5mm Audio, and Serial signals up to 85~100 meters. Based on the latest HDBaseT 3.0 technology, the CATx DP Extender supports uncompressed 720p/1080p/4K@60Hz (4:4:4) video and 480Mbps USB 2.0 signals.
KEX-HBT3-SH5K90 HDMI Supports Dual KVM Console, Local Out, 720P Video Return, Audio Embedding / Extracting, RS-232 Extension, USB 2.0 Extension, 4K / 5K / ATC / Medical Resolutions (KEX-HBT3-SH5K90)
Supports Dual KVM Console, Local Out, 720P Video Return, Audio Embedding / Extracting, RS-232 Extension, USB 2.0 Extension, 4K / 5K / ATC / Medical Resolutions
The HDBaseT 3.0 extender provides reliable local and remote access up to 70 - 100 meters for true 4K HDMI 2.0 sources over CAT6a/7 cable. It supports popular resolutions, including up to 4K@60Hz (4:4:4), 5K, 2K and 12MP, making it suitable for a range of applications from AV to medical. EDID management ensures seamless compatibility with connected displays. The extender also supports USB 2.0 for remote access to keyboards, mice, and USB devices. Additionally, it features serial extension, audio embedding/extracting, and a local console mode for flexible operation.

